CRJ 700/900 X - Update V1.2.0.0

Das FSX/FSX:SE/P3D Add-on "CRJ 700/900 X" wurde auf die Version 1.2.0.0 (REV 347) aktualisiert. Folgende Änderungen wurden vorgenommen:

  • [Fixed] Cabin altitude alert after pausing the sim or activating slew mode
  • [Fixed] Remove the parking brake requirement for external power to be AVAIL
  • [Fixed] APU fuel boost pump color for OFF state changed from yellow to white
  • [Fixed] Amber FUEL PUMP EICAS messages fixed
  • [Fixed] High bank angles at high altitude (outside SID/STAR/Appr)
  • [Fixed] Arrival Runways not showing up after de-selecting a runway
  • [Fixed] Brake Temperature boxes showing all the time
  • [Fixed] Fuel System rework
  • [Fixed] PERF INIT page 3/3 cut off text
  • [Added] Some code to keep pressurization in control while changing altitude by slew mode
  • [Fixed] Engines don't start anymore without fuel boost pumps on and/or other engine running *)
  • [Fixed] Pressurization system switching from climb to landing mode immediately after takeoff (under certain conditions)
  • [Fixed] DAVE: Mouse clickspots not working on SERVICES page after OPTIONS page subpage has been changed
  • [Fixed] Recalculation of CoG/Trim after sending payloads from CRJ Manager used old payload values
  • [Added] Yoke autopilot disconnect button mapped to "Autothrottle (Arm)" event. That's Shift+R here. Normally there's no button mapped to this event.
  • [Fixed] Engine start with only ground power but not ground air no longer possible
  • [Fixed] Radius to fix tracking under certain conditions
  • [Fixed] CTD in cross track error calculation when no next waypoint is available
  • [Fixed] Flightplan drawing stopped one waypoint before missed approach procedure under certain conditions
  • [Fixed] Couatl crash!
  • [Fixed] MFD TCAS Info vertical location
  • [Changed] Improved detection for missed approach waypoints
  • [Fixed] Pressurization: re-worked calculation of current target cabin altitude
  • [Fixed] Pressurization: some changes in mode switching (climb to descent)
  • [Fixed] Brake temperature cooling efficiency while flying with gear down now depends on airspeed
  • [Fixed] Changed ":" in MFD VNAV window to white
  • [Fixed] Moved wind indicator position on MFD
  • [Fixed] MFD Range-to-Alt ring now shows during descents
  • [Changed] Reduced the maximum possible frequency of ActiveSky WXR update calls to 1 per second
  • [Fixed] Aircraft crashes on payload/fuel change in CRJ Manager
  • [Fixed] LOC and GS capture and tracking (work in progress, but comments would be very welzcome)
  • [Fixed] PFD speed trend vector made less jittery
  • [Fixed] Brake temperatures increase a little faster
  • [Fixed] Pressing APPR sometimes only switched LOC or GS and not both
  • [Fixed] Cabin altitude going back to airport altitude after landing
  • [Fixed] 3-state switches now all work like this: Left mouse button = down/backwards and right mouse button = up/forward
  • [Updated] New model exports for P3D v4.3
  • [Fixed] Framerate issue
  • [Fixed] Removed course and distance above FROM waypoint on LEGS page
  • [Fixed] MFD TCAS altitude rounding issue
  • [Fixed] IRS instant alignment after loading/selecting a panel state
  • [Fixed] Main and Scav Ejector EICAS messages when engines are shut down
  • [Fixed] Temporary power loss when switching from APU to external power
  • [Updated] LOC/GS capture and holding
  • [Fixed] Flightplan loading and saving of SID->Enroute, Enroute->STAR and STAR->ApprTrans transitions
  • [Fixed] Crash when loading Navigraph database on 32 bit platforms
  • [Changed] Flightplan clearing after landing: ground speed changed to less than 15kts
  • [Fixed] Flightplan clearing after landing now also clears flight number
  • [Changed] Forward and aft cargo weights now separately settable in DAVE
  • [Changed] Pressurization controller rework (less fluctuation)
  • [Fixed] Waypoint sequencing inhibitted on ground
  • [Fixed] Waypoint sequencing condition added that requires the aircraft to fly roughly towards a waypoint before any sequencing can happen
  • [Fixed] Unwanted level off when changing the autopilot altitude selector through 28000ft
  • [Added] Flightplan is now cleared after landing (ground speed less than 80kts)
  • [Added] NAV-to-NAV transfer function
  • [Fixed] Early glideslope capture indication in PFD FMA
  • [Fixed] Direct-to not following course
  • [Fixed] Direct-to leg labels on MFD
  • [Fixed] Couatl.exe crash on loading the CRJ (experimental)
  • [Fixed] SEC FPLN page (and sub-pages)
  • [Fixed] ToD calculation after Direct-to
  • [Fixed] UP/DOWN arrow keys now only change PLN mode centered waypoint while on ACT LEGS page
  • [Fixed] Selecting ACT LEGS page while in PLN mode now resets the centered waypoint to the current one
  • [Fixed] Changed colors for HGS throttle hint
  • [Fixed] Re-arranged airspeed and altitude to zero degrees pitch
  • [Fixed] EGPWS terrain warnings now inactive until 60 seconds after takeoff
  • [Fixed] Landing elevation is no longer set by the FMS (wrong assumption of automatic functionality on my side)
  • [Fixed] FMS Status load and save functions
  • [Fixed] Top of descent location on MFD flightpath display corrected
  • [Fixed] Flight path angle calculation (fixes VNAV "snowflake" indicator on PFD too)
  • [Added] Support for Mark Foti's Remote CDU
  • [Added] Passenger count information support for FSDT's GSX
  • [Added] MCDU DATABASE pages
  • [Fixed] Several issues with pilot defined waypoints
  • [Fixed] Number of FIX pages increased to 10
  • [Fixed] VNAV altitude contraints between -1300 - -1 and 500 - 65000 are now accepted without a leading slash
  • [Fixed] VNAV snowflake and VS indicators
  • [Fixed] Audio panel selector/volume switches were inverted
  • [Fixed] "Save Flight Data" button not working in CRJ Manager x64
  • [Changed] Wheel blocks and ground power and air cart functionality now independent of model state (workaround for those users where they wouldn't show up)
  • [Fixed] Reverser armed EICAS messages not disappearing
  • [Fixed] Duplicate TOD markers on flightplan display
  • [Fixed] Pressing Engine START button while engine is running makes engine shutdown impossible
  • [Fixed] Missing waypoints on KDEN SID FOOOT3 from rwy 17R
  • [Fixed] Holding draw routine for holdings that are loaded with procedures
  • [Fixed] LEGS page distance to waypoints following a holding
  • [Fixed] FMS bearing pointers now point to the next waypoint instead of just pointing to the current course
  • [Fixed] Flaps movement trim correction does not activate after takeoff

Passende Artikel
-20
CRJ 700/900 X CRJ 700/900 X
  39,99 € * 49,99 € *
-20
CRJ 700/900 X CRJ 700/900 X
  39,96 € * 49,95 € *
News
Top Deals der Woche!

Verpassen Sie nicht unseren exklusiven Top Deal für Sie im Aerosoft Online Shop! [mehr]

SIMStarterNG - Update V1.8.3.1

Das FSX, FSX:SE, P3D Add-on SIMStarter NG wurde auf die Version 1.8.3.1 aktualisiert. Es wurden... [mehr]

Gamescom Line-Up 2018

Vom 21.-25. August öffnet die Gamescom ihre Tore – und auch in diesem Jahr wird Aerosoft wieder... [mehr]

WORK IN PROGRESS: Köln/Bonn professional

Auf den WORK IN PROGRESS Screenshots bekommen Sie einen ersten Eindruck von "Köln/Bonn... [mehr]

Was ist kompatibel mit Prepar3D V4?

Mit dem Erscheinen der neuen Prepar3D Version 4 werden Aerosoft Add-ons schrittweise aktualisiert... [mehr]

Jetzt vorbestellen: TPR Pendular Rudder...

Thrustmaster stellt das TPR Pendular Rudder vor, ein professionelles Steuerruder für... [mehr]

Dortmund XP - Update V1.1

Das XPlane 11 Add-on Dortmund XP wurde auf die Version 1.1 aktualisiert. Es wurden folgende... [mehr]

Jetzt erhältlich: USA South Florida -...

Das neue Aerofly FS 2 Add-on "USA South Florida" führt Sie nach Südflorida einschließlich des... [mehr]

Neue Ausgabe des FS Magazin

Die Ausgabe 5/2018 des renommierten FS Magazins ist ab sofort im Aerosoft Online Shop und im... [mehr]

WORK IN PROGRESS: Aerosoft A330 professional

Auf den Work in Progress Bildern des Aerosoft A330 professional bekommen Sie einen ersten Eindruck. [mehr]