Cirrus SR20

XPlane11
Download
26,59 € *

Preis ohne MwSt.

Als Sofortdownload verfügbar

  • AS13706
  • vFlyteAir Simulations
  • English
  • 2.60
Das Modell Cirrus SR20 von vFlyteAir verfügt über eine Glaspanel Instrumentation, das nach dem... mehr
Produktinformationen "Cirrus SR20"

Das Modell Cirrus SR20 von vFlyteAir verfügt über eine Glaspanel Instrumentation, das nach dem realen 'Perspective System' (tm) modelliert wurde. Das System ist eine Anpassung des Garmin G1000 Displays. Dieses Add-On bietet viele Funktion und wurde zum Teil von Mario Donick mit entwickelt.

Neue Features (XPlane 11):

  • Neue Motor- und Propellermodellierungen von Alan Shafto / AeroSimGaming
  • Verbesserung der gesamten Aerodynamik von Alan Shafto / AeroSimGaming
  • Verbesserungen der Cirrus Perspective G1000 Glaspanelsystems mit einfacher Flugplanbearbeitung, bessere Lesbarkeit der Karten, eingeschränkter Support  für die Auswahl von SIDs, STARs und Approaches (benötigt GNS430 Navigationsdaten - siehe Handbuch)
  • Aktualisierte PDF-Anzeigen mit genaueren künstlichen Horizont (attitude indicator) und realistischeren Fluggeschwindigkeits-, Höhen- und VVI-Tapes
  • Elektrisches System genauer modelliert - PFD und MFD befinden sich nun bei den separaten, elektrischen Bussen pro Cirrus POH
  • Neue On-screen, interaktive Menüs für PreFlight-Optionen und "smart" Weight & Balance Menü zum Hinzufügen des Kraftstoffes und der Passagiere
  • FMOD Sounds
  • PBR-Texturen
  • 4 neue benutzerdefinierte Lackierungen (Link)

Features on Primary Flight Display (PFD):

  • Artificial Horizon with high-resolution attitude indicator, flight director and roll scale
  • Speedtape with custom display of reference speeds
  • Altitude tape with custom vertical velocity indicator and minimums display
  • Enhanced HSI with turn indicator and three fully configurable bearing pointers for GPS, NAV1, NAV2 and ADF
  • Switchable inset windows for timer/references, minimums, wind, ADF, map, nearest airports, and flight plan
  • Cirrus-style top bar with power setting, frequencies and detailed GPS & autopilot information

Features on Multi Function Display (MFD):

  • Engine information system with switchable trim status display
  • Detailed system page with engine parameters, declutter mode, used fuel, remaining fuel, remaining range, remaining time, anti-ice & oxygen gauges, density altitude, temperatures, ISA deviation
  • Custom user interface for creating and editing flight plans (accessing X-Plane's navdata and default FMC). Add airports, fixes, VORs and NDBs to your flight plan.
  • “Nearest” page for airports, navaids and related frequencies
  • Cirrus-style top bar with destination window, frequencies and GPS information
  • X-Plane default map with weather radar and traffic warnings with custom icons
  • Interactive checklists and user-definable charts - users can download and install their own chart pages for display on the MFD screen

More system-wide specifics:

  • X-Plane autopilot with ROL, HDG, NAV, APPR, ALT, V/S, IAS modes and detailed status information
  • Custom calculations for ground speed, true airspeed, fuel & ranges, bearings and distances
  • Reversionary mode with engine information system and system summary (reacts on fuse pulled & MFD failure)

On-Screen Pop-Up Menu:

  • From any view in the simulator, you may click the small gear icon at the bottom-left of the screen to control several features of the model, including:
  • Open/Close the pilot door, passenger door and cargo door
  • Hide/Show the static ground elements (wheel chocks and pitot tube cover). NOTE: The static ground elements will be automatically removed for you if the airplane is under way.
  • Add/Remove a copilot – NOTE: adding the copilot also increased the total payload weight of the airplane by 70 kgs (175 lbs)
  • Click the upper right of the on-screen menu to dismiss the menu

Other Features:

  • Hypoxia is simulated at above 12,500’ cabin altitude. The screen will begin to dim if you are flying above 12,500’ MSL. Use the OXY switch on the lower center console to turn on oxygen supply and avoid hypoxia!
  • Oxygen supply is simulated – you have approximately 3 ½ hours of usable oxygen on board. The oxygen supply will begin to deplete slowly when the OXY switch is ON
  • Anti-Ice fluid is simulated – there are 3.5 gallons of anti-ice fluid available. The supply will deplete when anti-ice switch is ON
    ICE lights are modeled – use the ICE light switch to inspect the wing leading edges for ice build-up at night
  • The Cirrus BRS® parachute recovery system is modeled – click on the BRS handle on the cabin ceiling to deploy the parachute in case of emergency. NOTE: Engine should be OFF, and airspeed should be below 120 KTS when deploying the parachute!
  • Cirrus “Single Lever Throttle Control” is modeled – the SR20 automatically adjusts propeller speed through the use of the throttle lever. There is no separately-controlled propeller lever.
  • Customized HDR night lights – there are four dome lights inside the cockpit that will provide white flood lighting with HDR on in your rendering settings
  • Custom exterior lighting – all lights on the exterior (landing lights, strobe lights and navigation lights) are modeled using X-Plane parameterized lighting.
    10 Factory liveries provided – because Cirrus uses a special heat-resistant paint for their airplanes, the 10 liveries provided are based on Cirrus originals.
  • Custom sounds – try opening the passenger or pilot door while the engine is running!
  • Photo-realistic textures by Igor Kirilove – all textures are very hi-res (4K), providing a very realistic look
  • Fully animated model – all the details are in this model. Check out the door hinge mechanisms when you open and close the doors!
  • Super accurate 3D modeling – the model is extremely accurate in scale and dimensions

System requirements:
XPlane 11
Windows XP / Vista/ 7 / 8, Mac, Linux
MultiCore Processor with 2.6 Ghz or faster
4 GB RAM
3D video card with at least 1 GB
Download-size: 400 MB

Weiterführende Links zu "Cirrus SR20"
Piper Twin Comanche Piper Twin Comanche
  31,64 € *
BlackShape Prime BlackShape Prime
  15,99 € *
Tecnam P92 Tecnam P92
  14,99 € *
Airport Lugano XP11 Airport Lugano XP11
  19,95 € *
Piper Arrow III Piper Arrow III
  27,99 € *
Grumman Tiger AA-5B Grumman Tiger AA-5B
  25,99 € *
Dash 8 Q400 Dash 8 Q400
  29,95 € *
Diamond DA-62 Diamond DA-62
  34,66 € *
Faroe Islands XP Faroe Islands XP
  44,60 € *
Ikarus C42C Ikarus C42C
  28,80 € *
Seattle Airports XP Seattle Airports XP
  41,65 € *
Dortmund XP Dortmund XP
  19,95 € *
A320 Ultimate XP A320 Ultimate XP
  87,05 € *
Svalbard4XPlane Svalbard4XPlane
  44,95 € *
Tecnam P2002 Tecnam P2002
  22,00 € *
Embraer E-195 v2 Embraer E-195 v2
  39,62 € *
X-Life Deluxe X-Life Deluxe
  23,80 € *
Diamond DA-62 Diamond DA-62
  34,66 € *
Bell 407 XP11 Bell 407 XP11
  34,71 € *
Ikarus C42C Ikarus C42C
  28,80 € *
Rotate - MD-80 Pro Rotate - MD-80 Pro
  67,24 € *
Dash 8 Q400 Dash 8 Q400
  29,95 € *
C152 (XP11) C152 (XP11)
  34,95 € *
CRJ-200 XP CRJ-200 XP
  44,99 € *
BlackShape Prime BlackShape Prime
  15,99 € *
Tecnam P92 Tecnam P92
  14,99 € *
Piper Arrow III Piper Arrow III
  27,99 € *
King Air 350 King Air 350
  49,53 € *
A320 Ultimate XP A320 Ultimate XP
  87,05 € *
DHC-2 Beaver XP DHC-2 Beaver XP
  32,07 € *
News
Jetzt erhältlich: OMSI 2 Add-on Masterlite...

Das OMSI 2 Add-on Masterlite Pack ist ab sofort als Download im Aerosoft Online Shop erhältlich. [mehr]

Jetzt erhältlich: Airport Genf XP

Das XPlane 11 Add-on Airport Genf XP ist ab sofort als Download im Aerosoft Online Shop erhältlich. [mehr]

Jetzt erhältlich: OMSI 2 Add-on München City

Das OMSI 2 Add-on München City ist ab sofort als Download & Box im Aerosoft Online Shop erhältlich. [mehr]

Vario Design - Valberg Altisurface -...

Das FSX/P3D V4 Add-on Valberg Altisurface - LF0654 wurde auf die Version 1.1 aktualisiert. [mehr]

JARDesign Add-ons Update

Es wurden die 4 JARDesign Add-ons Airbus A320 Airliner, Airbus A330 Airliner, Ground Handling... [mehr]

HiFi Technologies im Aerosoft Shop

Entdecken Sie jetzt fünf HiFi Technologies - Active Sky Add-ons für FSX, FSX:Steam, Prepar3D V4... [mehr]

Neu: Custom-USB-Service

Entdecken Sie jetzt unseren neuen Service! Die Option Custom-USB-Service ermöglicht es Ihnen Ihre... [mehr]

PREVIEW: Chania, Kreta

Auf den Work in Progress Bildern von Chania, Kreta für Prepar3D V4 bekommen Sie einen ersten... [mehr]

Jetzt erhältlich: OMSI 2 Add-on Masterbus...

Das OMSI 2 Add-on Masterbus Gen 3 Pack ist ab sofort als Download im Aerosoft Online Shop... [mehr]

Dash 8 Q400 - Update 2.1908.1135

Das XPlane 11 Add-on Dash 8 Q400 Legacy von FlyJSim wurde auf die Version 2.1908.1135... [mehr]