Aerosoft A318/A319/A320/A321 professional - Update 1.2.4.0

The Prepar3D V4.4 add-ons "Aerosoft A318/A319 professional" & "Aerosoft A320/A321 professional" has been updated to version 1.2.4.0. Following changes have been made:

Version 1.2.4.0 - NON EXPERIMENTAL (save you liveries!):

  • Bug Fix: Avoiding CTD in Connected Flight Deck
  • Improvement: Finishing GSX2 interaction
  • Improvement: Refinements to Connected Flight Deck
  • Improvement: Vol1 manual updated

Version 1.2.3.6 - EXPERIMENTAL:

  • Bug Fix: Added ASC.cfg files missing from 1.2.3.5 update

Version 1.2.3.5 - EXPERIMENTAL:

  • Bug Fix: State loading issues solved
  • Bug Fix: New versions of Connect Flight Deck (still alpha code)
  • Improvement: Further tweaks on GSX2 interaction
  • Improvement: Small tweak to VC graphics

Version 1.2.3.3 - EXPERIMENTAL (Including Connected Flight Deck) Aso indicated as 1.2.3.4

  • Bug Fix: Fix in RAD NAV on VOR course
  • Bug Fix: Fixes in Loadsheet report, wrong values when not using the FuelPlanner
  • Bug Fix: Minor fix on RemoteCDU: it might be disabled under certain conditions.
  • Bug Fix: Fixes related to magnetic variation on WPTs shown on F-PLN page (multiple leg types)
  • Bug Fix: FMGS was totally locked up on PRINT ALL for WX reports
  • Bug Fix: Arrival airport data was sometimes unavailable when ALTN is also present, leading to issues like dashed UTC, EFOB etc.
  • Bug Fix: Occasional exception when scrolling the ARRIVALS page
  • Bug Fix: Fixes in F-PLN page, spd/mach and alt values displayed incorrectly, constraints displayed incorrectly
  • Bug Fix: During fire test the engine fault light on pedestal now nolonger comes on
  • Bug Fix: ELEC: GEN1+GEN2 "OFF" light logic inverted
  • Bug Fix: HYD: ECAM page: Status of HYD pumps inverted
  • Bug Fix: CTD happened on HOLD at PPOS
  • Bug Fix: Clearing the Flaps/Trim settings on RWY change
  • Bug Fix: TO SHIFT clearing manually and also automatically on RWY change
  • Bug Fix: PROG page: manually entered required RNP value was being overwritten, and also wrong font size;
  • Bug Fix: PSD placement on a curve was incorrect, e.g. LEMD ILS32RZ VIA ASBIN
  • Bug Fix: REPORT page: it was totally blank when the arrival airport wasn't selected.
  • Bug Fix: CTD on WX request with the wind speed given in other units
  • Bug Fix: ACARS: the wind speed from METAR REPORT wasn't converted when storing values (if given in different units, KMH or MPS)
  • Bug Fix: the RNP value wasn't synced with FO MCDU
  • Bug Fix: incorrect indication for the RNP value with precision
  • Bug Fix: enormous curves on ND caused by invalid navaid coordinates, if navaid isn't present in the active navdata
  • Improvement: Connected Flight Deck activated for Open Beta
  • Improvement: Tweaks to QNH/STD
  • Improvement: More tweaks to PFD
  • Improvement: ECAM COND: Temp drop to OAT made faster again when packs are switched off
  • Improvement: GCS switch of WXR now springloaded to AUTO position
  • Improvement: Multiple changes to DUPLICATES page
  • Improvement: Tweaks for GSX2
  • Improvement: layout for prints improved
  • Improvement: ELEC: Several internal adaptations to match newer BUS logic from A320
  • Improvement: Dual Input sounds added

Version 1.2.3.2 - EXPERIMENTAL:              

  • Bug Fix: Updates of GSX2 compatibility
  • Bug Fix: Issues with brake fan sounds solved
  • Bug Fix: AUTO ELEV value in CAB PRESS ECAM page was always 100 feet too high, now correct
  • Bug Fix: CVR GCTRL logic corrected
  • Bug Fix: APU RPM corrected for IAE engines
  • Bug Fix: CTD issues with print avoided
  • Bug Fix: Flaps/trim now corrected reset on runways change
  • Bug Fix: Speed/mach and alt values on F-PLN pages corrected
  • Bug Fix: Constrains displays incorrectly
  • Bug Fix: Display of MagVar for WPTs on F-PLN corrected
  • Improvement: Minor tweaks to PROG and REPORT pages
  • Improvement: Minor graphical tweaks to PFD
  • Improvement: Minor functional tweaks to PFD
    • Added RNP AR capability….L/DEV
    • Added DH indication
    • Added MDA indication
    • Added landing elevation indication
    • Added tailstrike pitch indication
  • Improvement: Logic behind CPT BARO and ISIS BARO changed
  • Improvement: Print margins
  • Improvement: ET timers now reset on loading Cold & Dark and Turn Around

Version 1.2.3.1 - EXPERIMENTAL:

  • Bug Fix: Better prevention of Stuka dives
  • Bug Fix: Brake fan sound played more reliably
  • Bug Fix: WHEEL ECAM pages corrected temperature indications
  • Bug Fix: Possible fix for missing paper in printer              
  • Improvement: Removed obsolete sounds
  • Improvement: Printer sound shortened
  • Improvement: Latest tweaks to printouts
  • Improvement: PFD markers updated to 2019 Airbus standard
  • Improvement: Background lighting for several displays unlinked from Shift-L
  • Improvement: ECAM COND Temp drop to OAT significantly slowed down when both packs are switched off
  • Improvememt: MAG VAR for runways corrected when using Navigraph

News
Avance de trabajos: Bari professional

Hágase una primera impresión con las primeras capturas del avance de los trabajos de Bari... [más]

Ya disponible: Ampliación para OMSI 2...

La ampliación para OMSI 2 Masterlite Pack ya está disponible como descarga en la Tienda Online de... [más]

Nuevo servicio -USB-Personalizada

¡Descubra nuestro nuevo servicio!. El servicio de USB personalizada permite que sus descargas... [más]

¡Aerosoft se posiciona en el gamescon 2019!

Aerosoft presenta las últimas novedades en el mundo de la simulación en el Hall 10.1 Stand D-060 [más]

AVANCE: Chania, Creta

Get a first impression on the work-in-progress pictures of Chania, Crete for Prepar3D V4. [más]

¡Ya disponible!: Ampliación OMSI 2 Pack...

La ampliación para OMSI 2 Pack Masterbus Gen 3 ya está disponible como descarga en la Tienda... [más]

Dash 8 Q400 - Actualización a la 2.1908.1135

La ampliación para XPlane 11 Dash 8 Q400 Legacy de FlyJSim ha sido actualizada a la versión... [más]

XPlane 11: Versión 11.35

El moderno y popular Simulador de Vuelo XPlane 11 ha sido actualizado a la versión 11.35 y nos... [más]

Airport Frankfurt XP - Actualización a la...

La ampliación para XPlane 11, Airport Frankfurt XP ha sido llevada a la versión 1.20 [más]

AVANCE DE TRABAJOS: Airport Malaga XP

Hágase una idea de los avances con las capturas del Airport Malaga XP para XPlane 11 [más]