Cabin, Cockpit and Instruments lights available with great effects
Realistic Flight model / Autorotations
Force Trim available
Full simulation of all switches and Circuit Breakers
Hydraulic simulation - Transient Torque
Fadec & Manual startup simulation
Extensive commands for assigning with keys or buttons, all overhead switches and circuit breakers are accessible by a custom command
Persistent fuel quantity for each livery, so each livery act like a different helicopter
Instrument Exceedance simulation (will record any exceedance on MGT, TRQ and NG)
Battery Starter simulation, don't allow your battery voltage to get too low otherwise you'll have problems during the start!
Hotstart simulation for manual startup
Switchable console bay allow to use Radios or Garmin 430
Air Conditioner simulation, including a nice sound that react to vent directions
Functional Floats can be deployed during flight for emergency landings or practicing over the water
Tie downs available to main rotor blades
Caps for turbine inlet, outlet and pitot
Fully articulated 3D rotor and Blade flex
GPU (Ground Power Unit) available
Pedal stop simulation, the equipment that reduces left pedal authority above 50kts, don't fly without it and push all left pedal, or you'll have troubles!
Transmission limit simulation, don't push it too far or you can break the transmission
Removable rotor shadows - Low and High skids options
Arcade mode is available for beginners
Pitch, Roll and Yaw augmented stability uses own algorithm for improved behavior
New Rigid cruise feature, allow the stability to progressively increase from hover to cruise, allowing longer flights without need of keep fighting with controls all the flight, while keeping the hover challenge intact.
Clickable external areas for increased interactivity
You can enter inside of helicopter by clicking on doors
Refuel the helicopter by clicking on the fuel inlet, a pie slider make it very easy
Open baggage compartment from exterior
Interact with battery compartment and connect or disconnect the battery cable from outside
A customization menu allow to set few equipments like (Baskets, Floats, Wire Cutters, Glass Doors) all in real-time with no need to restart the sim, each livery can be fully customized and will be unique
Report menu with (Min and Max G Force, Datcom, MGT, TRQ or NG exceedances, Number of crashes)
Over sounds included
3D directional sounds - Compatible with Rapture3D plugin (same used by codemasters)
Custom sounds for switches, buttons and circuit breakers
Realistic exterior and interior sounds - Simulation of all the Horns
Conclusion by XPlanereviews.com: "The latest creation from Dreamfoil is their Bell 407. Dreamfoil Creations have got quite a track record in producing really brilliant helicopters and the Bell 407 is no exception. Their Jetranger Bell 206 B3 was excellent and the Eurocopter AS350 B3 was a level above in design and features, and here in the 407 you are flying with a master at work."
Conclusion by Aerosoft Sim News (asn.aerosoft.com): "...The external model is indeed impressive and many tiny details are included and I'm sure that I haven’t found them all. This is also applicable for the 3D cockpit. It's lucky that the real cockpit isn’t complicated, still, even in this small area, DreamFoil Creations managed to add very many tiny details. The end result makes it a pleasure to fly this small Bell helicopter. What to say about the flight dynamics or characteristics? I may assume that these are tested with real Bell pilots. I’m not a real helicopter pilot. I only have a frozen FAA PPL so for me it’s difficult to judge how realistically it flies. I'm sure that DreamFoil Creations let real Bell 407 pilots test this add-on XP10 helicopter and based on their findings, the flight dynamics are accordingly adjusted to meet, as closely as possible, real flight characteristics. I'm very pleased with the amount of liveries added to the packages. They're very nice and together with the white “paint kit”, painters can paint their favorite Bell 407. I missed the NML files, but Alfredo had a good reason for not adding them. Another reason of not adding NML files is the frame rate impact. Speaking of frame rates, I think this add-on Bell 407 will run on many computer systems, although I have to admit that I only tested it with the Mac OSX Mavericks systems on both an iMac Late 2013 and a Late 2013 Mac Book Pro. Both are high-end systems, so it’s difficult for me to say it can’t run on a particular system. Remember, the instruments, including the default Garmin 430 aren’t using many resources. Let’s put it this way, they use less resources than a helicopter with EFIS, and FMS, EICAs or ECAM systems. Overall, this is a great helicopter, assuming you like to fly helicopters..."
The X-Plane 11 add-on Tromsø XP has been updated to version 1.3. [mehr]
Bienvenue sur aerosoft.com! Nous utilisons des cookies. Certains d'entre eux sont techniquement nécessaires (par exemple pour le panier), d'autres nous aident à améliorer nos offres et à vous offrir une meilleure expérience utilisateur.
Vous acceptez les cookies suivants en cliquant sur Accepter tout. Vous trouverez des informations complémentaires dans les paramètres de confidentialité, où vous pourrez également modifier votre sélection à tout moment. Il suffit d'aller à la page avec la déclaration de protection des données. Consultez notre déclaration de protection des données.
Les cookies techniquement requis permettent à un site web de sauvegarder les informations qui ont été saisies (telles que les noms d'utilisateur ou la sélection de la langue) et d'offrir des fonctions améliorées.