Bell 407 XP10

X-Plane 10
Download
27,63 € *

Prezzi incl. 22% IVA

Disponibile come download immediato

  • AS13056
  • X-Plane.org
  • DreamFoil Creations
  • English
  • 1.00 SP1.1
High quality 3D model and textures: Cabin, Cockpit and Instruments lights available with... altro
Informazione prodotto "Bell 407 XP10"

High quality 3D model and textures:

  • Cabin, Cockpit and Instruments lights available with great effects
  • Realistic Flight model / Autorotations
  • Force Trim available
  • Full simulation of all switches and Circuit Breakers
  • Hydraulic simulation - Transient Torque
  • Fadec & Manual startup simulation
  • Extensive commands for assigning with keys or buttons, all overhead switches and circuit breakers are accessible by a custom command
  • Persistent fuel quantity for each livery, so each livery act like a different helicopter
  • Instrument Exceedance simulation (will record any exceedance on MGT, TRQ and NG)
  • Battery Starter simulation, don't allow your battery voltage to get too low otherwise you'll have problems during the start!
  • Hotstart simulation for manual startup
  • Switchable console bay allow to use Radios or Garmin 430
  • Air Conditioner simulation, including a nice sound that react to vent directions
  • Functional Floats can be deployed during flight for emergency landings or practicing over the water
  • Tie downs available to main rotor blades
  • Caps for turbine inlet, outlet and pitot
  • Fully articulated 3D rotor and Blade flex
  • GPU (Ground Power Unit) available
  • Pedal stop simulation, the equipment that reduces left pedal authority above 50kts, don't fly without it and push all left pedal, or you'll have troubles!
  • Transmission limit simulation, don't push it too far or you can break the transmission
  • Removable rotor shadows - Low and High skids options

 

Stability Improvements:

  • Arcade mode is available for beginners
  • Pitch, Roll and Yaw augmented stability uses own algorithm for improved behavior
  • New Rigid cruise feature, allow the stability to progressively increase from hover to cruise, allowing longer flights without need of keep fighting with controls all the flight, while keeping the hover challenge intact.

SmartMenu Technology:

  • Clickable external areas for increased interactivity
  • You can enter inside of helicopter by clicking on doors
  • Refuel the helicopter by clicking on the fuel inlet, a pie slider make it very easy
  • Open baggage compartment from exterior
  • Interact with battery compartment and connect or disconnect the battery cable from outside
  • A customization menu allow to set few equipments like (Baskets, Floats, Wire Cutters, Glass Doors) all in real-time with no need to restart the sim, each livery can be fully customized and will be unique
  • Report menu with (Min and Max G Force, Datcom, MGT, TRQ or NG exceedances, Number of crashes)

DreamEngine sounds:

  • Over sounds included
  • 3D directional sounds - Compatible with Rapture3D plugin (same used by codemasters)
  • Custom sounds for switches, buttons and circuit breakers
  • Realistic exterior and interior sounds - Simulation of all the Horns

Awards/Reviews:

Conclusion by XPlanereviews.com:
"The latest creation from Dreamfoil is their Bell 407. Dreamfoil Creations have got quite a track record in producing really brilliant helicopters and the Bell 407 is no exception. Their Jetranger Bell 206 B3 was excellent and the Eurocopter AS350 B3 was a level above in design and features, and here in the 407 you are flying with a master at work."

Read review

Conclusion by Aerosoft Sim News ( asn.aerosoft.com ):
"...The external model is indeed impressive and many tiny details are included and I'm sure that I haven’t found them all. This is also applicable for the 3D cockpit. It's lucky that the real cockpit isn’t complicated, still, even in this small area, DreamFoil Creations managed to add very many tiny details. The end result makes it a pleasure to fly this small Bell helicopter. What to say about the flight dynamics or characteristics? I may assume that these are tested with real Bell pilots. I’m not a real helicopter pilot. I only have a frozen FAA PPL so for me it’s difficult to judge how realistically it flies. I'm sure that DreamFoil Creations let real Bell 407 pilots test this add-on XP10 helicopter and based on their findings, the flight dynamics are accordingly adjusted to meet, as closely as possible, real flight characteristics. I'm very pleased with the amount of liveries added to the packages. They're very nice and together with the white “paint kit”, painters can paint their favorite Bell 407. I missed the NML files, but Alfredo had a good reason for not adding them. Another reason of not adding NML files is the frame rate impact. Speaking of frame rates, I think this add-on Bell 407 will run on many computer systems, although I have to admit that I only tested it with the Mac OSX Mavericks systems on both an iMac Late 2013 and a Late 2013 Mac Book Pro. Both are high-end systems, so it’s difficult for me to say it can’t run on a particular system. Remember, the instruments, including the default Garmin 430 aren’t using many resources. Let’s put it this way, they use less resources than a helicopter with EFIS, and FMS, EICAs or ECAM systems. Overall, this is a great helicopter, assuming you like to fly helicopters..."

Read review

Link correlati a "Bell 407 XP10"

Windows, MAC or Linux
X-Plane 10.20 or higher - 32 and 64 bit compatible - not compatible with XPlane 11
Joystick required
512Mb VRAM - 1GB VRAM Recommended
Download-size: 590 MB

-50
Carenado - M20J Mooney (XP) Carenado - M20J Mooney (XP)
  15,19 € * 30,38 € *
-50
Carenado - PA32 Saratoga SP (XP) Carenado - PA32 Saratoga SP (XP)
  15,19 € * 30,38 € *
-50
Carenado - PA28 181 Archer II (XP) Carenado - PA28 181 Archer II (XP)
  13,97 € * 27,94 € *
-50
Carenado - C172N Skyhawk II (XP) Carenado - C172N Skyhawk II (XP)
  13,97 € * 27,94 € *
-50
Carenado - C185F Skywagon (XP) Carenado - C185F Skywagon (XP)
  15,19 € * 30,38 € *
-50
Carenado - V35 Bonanza (XP) Carenado - V35 Bonanza (XP)
  15,19 € * 30,38 € *
-50
Carenado - PA34 200 T Seneca II (XP10) Carenado - PA34 200 T Seneca II (XP10)
  15,80 € * 31,60 € *
Challenger 300 Challenger 300
  28,65 € *
Schweizer S300CBi Schweizer S300CBi
  35,83 € *
-25
FACO Simulations - F-15C Eagle XP FACO Simulations - F-15C Eagle XP
  30,71 € * 40,96 € *
Diamond DA-62 Diamond DA-62
  38,91 € *
King Air 350 King Air 350
  55,31 € *
Ikarus C42C Ikarus C42C
  29,53 € *
CRJ-200 XP CRJ-200 XP
  44,99 € *
Airport Mykonos Airport Mykonos
  20,45 € *
Revolution X Revolution X
  34,81 € *
-50
Carenado - PA34 200 T Seneca II (XP10) Carenado - PA34 200 T Seneca II (XP10)
  15,80 € * 31,60 € *
Cape Canaveral X Cape Canaveral X
  15,33 € *
Aktuell im Blog
OMSI 2 Add-on Velbert

The OMSI 2 Add-on Velbert is available now at the Aerosoft Online Shop. [mehr]

Región de Murcia Airport | P3D V4/V5 add-on

The Prepar3D V4/V5 add-on Región de Murcia Airport is available now as download in the Aerosoft... [mehr]

Airport Istanbul XP

The X-Plane 11 add-on Airport Istanbul XP is now available for download in the Aerosoft Online Shop! [mehr]

Terrapearl Studios - Molokai Airport |...

The Microsoft Flight Simulator DLC Terrapearl Studios - Molokai Airport is available now as... [mehr]

MSFS DLC Aerosoft Aircraft CRJ 550/700 |...

The Microsoft Flight Simulator DLC Aerosoft Aircraft CRJ 550/700 has been updated via ASUpdater... [mehr]

Available now | Honeycomb - Throttle Pack...

Look forward to the Honeycomb - Throttle Pack for Airbus A319-A380 is now available in the... [mehr]

World of Aircraft: Glider Simulator |...

The first part of the World of Aircraft series "Glider Simulator" is available now as download in... [mehr]

Aerosoft Airport Friedrichshafen | Update

The Microsoft Flight Simulator DLC Aerosoft Airport Friedrichshafen has been updated to version... [mehr]

Grand Casino Tycoon

Create your casino empire from scratch and design your very own masterpiece! [mehr]

SoFly - Landing Challenge Pro | MSFS DLC

The Microsoft Flight Simulator Add-on SoFly - Landing Challenge Pro is available now as download... [mehr]