VC10 Jetliner

FSX/FSX:SE/P3D V4
Download
$37.99 *

Price excl. VAT

Available as instant download

  • AS14331
  • Just Flight London
  • English
  • 1.4
This FSX/P3D VC10 add-on provides the Type 1101 (BOAC Standard) variant in ten liveries and... more
Product information "VC10 Jetliner"

This FSX/P3D VC10 add-on provides the Type 1101 (BOAC Standard) variant in ten liveries and includes all four flight crew positions (Captain, Co-Pilot, Flight Engineer and Navigator), Rolls-Royce Conway engine sounds and accurate flight dynamics.

Comprehensive but easy-to-use systems are simulated, including realistic engine start procedures, autopilot with pitch and bank hold, autothrottle with IAS and MACH hold capabilities, simulated powered flying control units (PFCUs) and a realistic fuel system with transfer and jettison functionality.

Model:

  • Accurately modelled Type 1101 (BOAC Standard), built using real-world aircraft plans
  • Ground equipment (air stairs and baggage carts)
  • Specular map to give realistic light effects on the aircraft surfaces
  • Bump mapping to give a more realistic 3D effect to aircraft liveries
  • Many detailed animations, including:
    • Accurate landing gear operations
    • Authentic flaps/slat action
    • Variable-incidence tailplane
    • Windshield wipers (separate Captain and Co-Pilot controls)
    • Passenger doors (fore and aft) and cargo doors (port and starboard)
    • Animated pilots
    • Thrust reverser doors on outboard engines
    • Retractable taxi/landing lights

Cockpit:

  • 3D cockpit with virtually all the hundreds of switches, knobs and levers animated and functional
  • All four flight crew positions modelled (Captain, Co-Pilot, Flight Engineer and Navigator)
  • Cockpit textures feature wear and tear to produce an authentic environment
  • Cockpit lighting with atmospheric instrument backlighting
  • Special ‘baked’ textures have been used to present a well-used look and feel to the cockpit area and controls
  • Fully modelled Flight Engineer station with fuel, engine, electrical, anti-ice and hydraulic controls (automatically configured in a 'ready for take-off' state when the aircraft is first loaded, allowing you to get airborne within seconds)
  • Many features have been added to help with usability such as a switch to hide the control yokes for a better view of the instruments and pre-set angled views for the overhead panel, centre pedestal and Flight Engineer station
  • Animated Captain’s arm-rest for improved visibility of centre pedestal
  • Ability to integrate third-party weather radar
  • Split flap/slat lever with the ability to extend slats without deploying flaps
  • NAV 1/2 and ADF 1/2 radios feeding CDIs, VOR and ADF indicators for easy navigation
  • GPS unit included for easy navigation
  • Numerous warning annunciators will illuminate on fault detection and a functional engine fire warning and protection/extinguishing system are built into the cockpit
  • Animated cockpit side windows

Systems:

  • Custom-coded fuel system with wing and centre tanks, fuel transfer and jettison, cross-feed and LP/HP cock controls
  • Custom-coded autopilot with pitch and bank hold, ability to navigate via VOR/GPS and autothrottle with IAS/MACH hold capabilities
  • Thrust-reverse system which, like the real aircraft, is only available on outboard engines
  • Realistic trim lever operation with rate of tailplane movement proportional to the rate of trim lever displacement from the central position
  • Aircraft configuration system that will allow you to choose between 'cold & dark' or 'ready for take-off'
  • Fully compatible with default control assignments (lighting controls, autopilot controls, HP cock levers etc.) and [CTRL]+[E] autostart
  • Realistic engine start procedures using ground air supply and cross-bleed
  • Simulated powered flying control units (PFCUs) – loss of electrical power or manual isolation of PFCUs will render flying controls (ailerons, elevator, rudder and spoilers) inoperative, as in the real aircraft

Liveries:

  • British Airways G-ARVM (circa 1976)
  • British Airways G-ARVM (red tail)
  • BOAC G-ARVF (circa 1964)
  • BOAC G-ARVC (circa 1966)
  • BOAC G-ARVC (circa 1974)
  • Gulf Air A40-VI
  • Gulf Air A40-VK
  • Just Flight house livery
  • Nigeria Airways 5N-ABD
  • Government of the United Arab Emirates G-ARVF

System requirements:
Flight Simulator X (Acceleration, Gold), FSX: Steam Edition or Lockheed Martin - Prepar3D V1-V4
Windows 10 / 8 / 7 / Vista / XP (32-bit or 64-bit)
2.0 GHz or any Dual Core
2 GB RAM
1 GB graphics card
3 GB hard drive space
Download-Size: 450 MB

Related links to "VC10 Jetliner"

Version 1.4:

  • VMO needle on ASI – fixed
  • New standby altimeter fitted for improved usability/functionality
CRJ 700/900 X CRJ 700/900 X
  $49.99 *
C-46 Commando C-46 Commando
  $37.99 *
Antonov An-2 Antonov An-2
  $29.99 *
Douglas DC-8 Douglas DC-8
  $42.99 *
Airbus Bundle Airbus Bundle
  $52.99 *
News
Available now: ZUSI 3 - Aerosoft Edition

The Train Simulation ZUSI 3 - Aerosoft Edition is available now as download in the Aerosoft... [more]

Available now: Canary Islands professional...

The Prepar3D V4+ add-on "Canary Islands professional - Gran Canaria" of sim-wings is available... [more]

C-46 Commando - Update 1.08

The FSX/FSX:SE/P3D V4 Just Flight add-on "C-46 Commando" has been updated to version 1.08. [more]

Polish Airports Vol. 2 XP (v2)

The XPlane add-on "Polish Airports Vol. 2 XP (v2)" of Drzewiecki Design has been updated to... [more]

Chicago Airports X - Update 1.2

The FSX, FSX:SE & P3D V4 add-on "Chicago Airports X" of Drzewiecki Design has been updated to... [more]

Miami City XP - Update 1.4

The XPlane add-on "Miami City XP" of Drzewiecki Design has been updated to version 1.4. [more]

Aerofly FS 2 - Update 2.04.07.15

The Stand-Alone flight simulator Aerofly FS 2 of IPACS has been updated to version 2.04.07.15. [more]

LUKK Chisinau XP - Update 1.2

The XPlane 11 add-on "LUKK Chisinau XP" of Drzewiecki Design has been updated to version 1.2. [more]

Baku XP - Update 1.3

The XPlane add-on Baku XP of Drzewiecki Design has been updated to version 1.3. [more]

Available now: Canary Islands professional...

The Prepar3D V4 add-on "Canary Islands professional - Tenerife Sur" is available now as download... [more]