CRJ 700/900 X - Update V1.2.0.0

The FSX/FSX:SE/P3D add-on "CRJ 700/900 X" has been updated to version 1.2.0.0 (REV 347). Following changes have been made:

  • [Fixed] Cabin altitude alert after pausing the sim or activating slew mode
  • [Fixed] Remove the parking brake requirement for external power to be AVAIL
  • [Fixed] APU fuel boost pump color for OFF state changed from yellow to white
  • [Fixed] Amber FUEL PUMP EICAS messages fixed
  • [Fixed] High bank angles at high altitude (outside SID/STAR/Appr)
  • [Fixed] Arrival Runways not showing up after de-selecting a runway
  • [Fixed] Brake Temperature boxes showing all the time
  • [Fixed] Fuel System rework
  • [Fixed] PERF INIT page 3/3 cut off text
  • [Added] Some code to keep pressurization in control while changing altitude by slew mode
  • [Fixed] Engines don't start anymore without fuel boost pumps on and/or other engine running *)
  • [Fixed] Pressurization system switching from climb to landing mode immediately after takeoff (under certain conditions)
  • [Fixed] DAVE: Mouse clickspots not working on SERVICES page after OPTIONS page subpage has been changed
  • [Fixed] Recalculation of CoG/Trim after sending payloads from CRJ Manager used old payload values
  • [Added] Yoke autopilot disconnect button mapped to "Autothrottle (Arm)" event. That's Shift+R here. Normally there's no button mapped to this event.
  • [Fixed] Engine start with only ground power but not ground air no longer possible
  • [Fixed] Radius to fix tracking under certain conditions
  • [Fixed] CTD in cross track error calculation when no next waypoint is available
  • [Fixed] Flightplan drawing stopped one waypoint before missed approach procedure under certain conditions
  • [Fixed] Couatl crash!
  • [Fixed] MFD TCAS Info vertical location
  • [Changed] Improved detection for missed approach waypoints
  • [Fixed] Pressurization: re-worked calculation of current target cabin altitude
  • [Fixed] Pressurization: some changes in mode switching (climb to descent)
  • [Fixed] Brake temperature cooling efficiency while flying with gear down now depends on airspeed
  • [Fixed] Changed ":" in MFD VNAV window to white
  • [Fixed] Moved wind indicator position on MFD
  • [Fixed] MFD Range-to-Alt ring now shows during descents
  • [Changed] Reduced the maximum possible frequency of ActiveSky WXR update calls to 1 per second
  • [Fixed] Aircraft crashes on payload/fuel change in CRJ Manager
  • [Fixed] LOC and GS capture and tracking (work in progress, but comments would be very welzcome)
  • [Fixed] PFD speed trend vector made less jittery
  • [Fixed] Brake temperatures increase a little faster
  • [Fixed] Pressing APPR sometimes only switched LOC or GS and not both
  • [Fixed] Cabin altitude going back to airport altitude after landing
  • [Fixed] 3-state switches now all work like this: Left mouse button = down/backwards and right mouse button = up/forward
  • [Updated] New model exports for P3D v4.3
  • [Fixed] Framerate issue
  • [Fixed] Removed course and distance above FROM waypoint on LEGS page
  • [Fixed] MFD TCAS altitude rounding issue
  • [Fixed] IRS instant alignment after loading/selecting a panel state
  • [Fixed] Main and Scav Ejector EICAS messages when engines are shut down
  • [Fixed] Temporary power loss when switching from APU to external power
  • [Updated] LOC/GS capture and holding
  • [Fixed] Flightplan loading and saving of SID->Enroute, Enroute->STAR and STAR->ApprTrans transitions
  • [Fixed] Crash when loading Navigraph database on 32 bit platforms
  • [Changed] Flightplan clearing after landing: ground speed changed to less than 15kts
  • [Fixed] Flightplan clearing after landing now also clears flight number
  • [Changed] Forward and aft cargo weights now separately settable in DAVE
  • [Changed] Pressurization controller rework (less fluctuation)
  • [Fixed] Waypoint sequencing inhibitted on ground
  • [Fixed] Waypoint sequencing condition added that requires the aircraft to fly roughly towards a waypoint before any sequencing can happen
  • [Fixed] Unwanted level off when changing the autopilot altitude selector through 28000ft
  • [Added] Flightplan is now cleared after landing (ground speed less than 80kts)
  • [Added] NAV-to-NAV transfer function
  • [Fixed] Early glideslope capture indication in PFD FMA
  • [Fixed] Direct-to not following course
  • [Fixed] Direct-to leg labels on MFD
  • [Fixed] Couatl.exe crash on loading the CRJ (experimental)
  • [Fixed] SEC FPLN page (and sub-pages)
  • [Fixed] ToD calculation after Direct-to
  • [Fixed] UP/DOWN arrow keys now only change PLN mode centered waypoint while on ACT LEGS page
  • [Fixed] Selecting ACT LEGS page while in PLN mode now resets the centered waypoint to the current one
  • [Fixed] Changed colors for HGS throttle hint
  • [Fixed] Re-arranged airspeed and altitude to zero degrees pitch
  • [Fixed] EGPWS terrain warnings now inactive until 60 seconds after takeoff
  • [Fixed] Landing elevation is no longer set by the FMS (wrong assumption of automatic functionality on my side)
  • [Fixed] FMS Status load and save functions
  • [Fixed] Top of descent location on MFD flightpath display corrected
  • [Fixed] Flight path angle calculation (fixes VNAV "snowflake" indicator on PFD too)
  • [Added] Support for Mark Foti's Remote CDU
  • [Added] Passenger count information support for FSDT's GSX
  • [Added] MCDU DATABASE pages
  • [Fixed] Several issues with pilot defined waypoints
  • [Fixed] Number of FIX pages increased to 10
  • [Fixed] VNAV altitude contraints between -1300 - -1 and 500 - 65000 are now accepted without a leading slash
  • [Fixed] VNAV snowflake and VS indicators
  • [Fixed] Audio panel selector/volume switches were inverted
  • [Fixed] "Save Flight Data" button not working in CRJ Manager x64
  • [Changed] Wheel blocks and ground power and air cart functionality now independent of model state (workaround for those users where they wouldn't show up)
  • [Fixed] Reverser armed EICAS messages not disappearing
  • [Fixed] Duplicate TOD markers on flightplan display
  • [Fixed] Pressing Engine START button while engine is running makes engine shutdown impossible
  • [Fixed] Missing waypoints on KDEN SID FOOOT3 from rwy 17R
  • [Fixed] Holding draw routine for holdings that are loaded with procedures
  • [Fixed] LEGS page distance to waypoints following a holding
  • [Fixed] FMS bearing pointers now point to the next waypoint instead of just pointing to the current course
  • [Fixed] Flaps movement trim correction does not activate after takeoff

Related products
-20
CRJ 700/900 X CRJ 700/900 X
  $39.99 * $49.99 *
-20
CRJ 700/900 X CRJ 700/900 X
  $39.99 * $49.99 *
News
Top Deals of the week!

Do not miss our Top Deals of the week exclusively for you at the Aerosoft Online Shop! [more]

SIMStarterNG - Update V1.8.3.1

The FSX, FSX:SE, P3D add-on SIMStarter NG has been updated to version 1.8.3.1. Following changes... [more]

WORK IN PROGRESS: Köln/Bonn professional

On the WORK IN PROGRESS screenshots you get a first impression of "Köln/Bonn professional", a... [more]

What's Prepar3D V4 compatible?

With the release of the new Prepar3D version 4, Aerosoft's add-ons are being updated and adapted... [more]

Dortmund XP - Update V1.1

The XPlane 11 add-on Dortmund XP has been updated to version 1.1. Following changes have been made. [more]

Available now: USA South Florida - Aerofly...

The new Aerofly FS 2 add-on "USA South Florida" takes you to the southern part of Florida... [more]

WORK IN PROGRESS: Aerosoft A330 professional

Get a first impression on the work-in-progress pictures of the long-haul aircraft Aerosoft A330... [more]

Aerosoft A318/A319 professional - Update...

The Prepar3D v4.3 add-on Aerosoft A318/A319 professional has been updated to version 1.1.0.0.... [more]

Aerofly FS 2 - Update 2.01.05.35

The flight simulator "Aerofly FS 2" has been updated to version 2.01.05.35. [more]

Available now: Dortmund XP

The scenery Dortmund is available now as add-on for XPlane 11. Besides the entire urban area of... [more]