Cirrus SR20

XPlane11/X-Plane 10
Download
$29.95 *

Price excl. VAT

Available as instant download

  • AS13706
  • vFlyteAir Simulations
  • English
  • 2.60
The vFlyteAir model of Cirrus SR20 features a glass panel instrumentation modeled after the... more
Product information "Cirrus SR20"

The vFlyteAir model of Cirrus SR20 features a glass panel instrumentation modeled after the Perspective (tm) system found in the real Cirrus SR20. The Perspective system is an adaptation of the Garmin G1000 display. This simulation has many working features, and was created partly by Mario Donick.

New features in version 2.5 (only for XPlane 11):

  • New engine and propeller modelling by Alan Shafto / AeroSimGaming
  • Improvements to overall aerodynamics by Alan Shafto / AeroSimGaming
  • Improvements to the Cirrus Perspective G1000 glass panel system including easier flight plan editing, better readability on the moving map with larger icons and text, limited support for selecting SIDs, STARs and approaches (requires GNS430 nav data - see manual for instructions)
  • Improved PFD display with more accurate attitude indicator and more realistic airspeed, altitude and VVI tapes
  • Electrical system more accurately modeled - the PFD and MFD are now on separate electrical busses per the Cirrus POH
  • New on-screen, interactive menus for PreFlight options and a "smart" Weight & Balance menu for adding fuel and passengers
  • FMOD sounds
  • PBR textures
  • Four new custom liveries (Link)

New Features in version 2.0 (only X-Plane 10.50):

  • SCROLL-WHEEL MANIPULATORS - Cockpit knobs and wheels now support mouse scroll-wheel manipulation, making knob adjustments much easier and faster
  • SEPARATE AUDIO VOLUME CONTROLS - Radio audio volumes are controlled separately – the PFD VOL knob controls COM1 and NAV1 audio volumes and the MFD VOL knob controls COM2 and NAV2 volumes. The Audio Panel VOL knob controls DME, ADF and MRKR audio volumes.
  • 3D PROPELLER DISC EFFECT - the spinning prop disc now has a 3D effect using X-Plane's built-in custom prop disc features, and is plugin controlled.
  • EXTERIOR LIGHTING IMPROVED - new HDR exterior lights with plugin-controlled custom strobe flash sequence.
  • CUSTOM ENGINE STARTUP - the SR20 now behaves more realistically during engine start. The colder the engine is at initial startup, the longer it takes to start (up to 4 seconds of starter cranking).
  • IMPROVED SOUNDS - new engine starter sound, engine startup sounds, and propeller sounds. You can now turn off the SQUELCH defeat on the audio panel - a radio static noise will be heard.
  • IMPROVED FLIGHT CHARACTERISTICS - The X-Plane left roll tendency is reduced by reducing prop torque effect.
  • IMPROVED CONTROL MENU - Updated with new art assets.
  • ADF INSET ON PDF DISPLAY NOW SHOWS ADF AUDIO VOLUME. The audio panel volume controls ADF, DME and MRKR audio volumes.
  • Version 2.0 requires X-Plane 10.50

Features on Primary Flight Display (PFD):

  • Artificial Horizon with high-resolution attitude indicator, flight director and roll scale
  • Speedtape with custom display of reference speeds
  • Altitude tape with custom vertical velocity indicator and minimums display
  • Enhanced HSI with turn indicator and three fully configurable bearing pointers for GPS, NAV1, NAV2 and ADF
  • Switchable inset windows for timer/references, minimums, wind, ADF, map, nearest airports, and flight plan
  • Cirrus-style top bar with power setting, frequencies and detailed GPS & autopilot information

Features on Multi Function Display (MFD):

  • Engine information system with switchable trim status display
  • Detailed system page with engine parameters, declutter mode, used fuel, remaining fuel, remaining range, remaining time, anti-ice & oxygen gauges, density altitude, temperatures, ISA deviation
  • Custom user interface for creating and editing flight plans (accessing X-Plane's navdata and default FMC). Add airports, fixes, VORs and NDBs to your flight plan.
  • “Nearest” page for airports, navaids and related frequencies
  • Cirrus-style top bar with destination window, frequencies and GPS information
  • X-Plane default map with weather radar and traffic warnings with custom icons
  • Interactive checklists and user-definable charts - users can download and install their own chart pages for display on the MFD screen

More system-wide specifics:

  • X-Plane autopilot with ROL, HDG, NAV, APPR, ALT, V/S, IAS modes and detailed status information
  • Custom calculations for ground speed, true airspeed, fuel & ranges, bearings and distances
  • Reversionary mode with engine information system and system summary (reacts on fuse pulled & MFD failure)

On-Screen Pop-Up Menu:

  • From any view in the simulator, you may click the small gear icon at the bottom-left of the screen to control several features of the model, including:
  • Open/Close the pilot door, passenger door and cargo door
  • Hide/Show the static ground elements (wheel chocks and pitot tube cover). NOTE: The static ground elements will be automatically removed for you if the airplane is under way.
  • Add/Remove a copilot – NOTE: adding the copilot also increased the total payload weight of the airplane by 70 kgs (175 lbs)
  • Click the upper right of the on-screen menu to dismiss the menu

Other Features:

  • Hypoxia is simulated at above 12,500’ cabin altitude. The screen will begin to dim if you are flying above 12,500’ MSL. Use the OXY switch on the lower center console to turn on oxygen supply and avoid hypoxia!
  • Oxygen supply is simulated – you have approximately 3 ½ hours of usable oxygen on board. The oxygen supply will begin to deplete slowly when the OXY switch is ON
  • Anti-Ice fluid is simulated – there are 3.5 gallons of anti-ice fluid available. The supply will deplete when anti-ice switch is ON
    ICE lights are modeled – use the ICE light switch to inspect the wing leading edges for ice build-up at night
  • The Cirrus BRS® parachute recovery system is modeled – click on the BRS handle on the cabin ceiling to deploy the parachute in case of emergency. NOTE: Engine should be OFF, and airspeed should be below 120 KTS when deploying the parachute!
  • Cirrus “Single Lever Throttle Control” is modeled – the SR20 automatically adjusts propeller speed through the use of the throttle lever. There is no separately-controlled propeller lever.
  • Customized HDR night lights – there are four dome lights inside the cockpit that will provide white flood lighting with HDR on in your rendering settings
  • Custom exterior lighting – all lights on the exterior (landing lights, strobe lights and navigation lights) are modeled using X-Plane parameterized lighting.
    10 Factory liveries provided – because Cirrus uses a special heat-resistant paint for their airplanes, the 10 liveries provided are based on Cirrus originals.
  • Custom sounds – try opening the passenger or pilot door while the engine is running!
  • Photo-realistic textures by Igor Kirilove – all textures are very hi-res (4K), providing a very realistic look
  • Fully animated model – all the details are in this model. Check out the door hinge mechanisms when you open and close the doors!
  • Super accurate 3D modeling – the model is extremely accurate in scale and dimensions

System requirements:
XPlane 11 / X-Plane 10.50
Windows XP/ Vista / 7 / 8, Mac, Linux
MultiCore Processor with 2.6 Ghz or faster
4 GB RAM
3D video card with at least 1 GB
Download-size: 400 MB

Related links to "Cirrus SR20"
CRJ-200 XP CRJ-200 XP
  $46.99 *
Tecnam P2002 Tecnam P2002
  $22.00 *
Dash 8 Q400 Dash 8 Q400
  $29.99 *
NEW
Douglas DC-8 Douglas DC-8
  $42.99 *
Tecnam P92 Tecnam P92
  $14.95 *
News
Sim-wings - Malaga professional for...

The Airport Malaga – Costa del Sol is the busiest airport in the Spanish region Andalusia,... [more]

What's Prepar3D V4 compatible?

With the release of the new Prepar3D version 4, Aerosoft's add-ons are being updated and adapted... [more]

Top Deals of the week!

Do not miss our Top Deals of the week exclusively for you at the Aerosoft Online Shop! [more]

Douglas DC-8 - Update V1.02

The Prepar3D V4 add-on "Douglas DC-8" has been updated to version 1.02. Following changes have... [more]

WORK IN PROGRESS - World of Aircraft :...

On the WORK IN PROGRESS screenshots you get a first impression of "World of Aircraft : Glider... [more]

Sim-wings - Fairbanks professional for...

Sim-wings - Fairbanks professional is available now for Prepar3D V4! Fly to the second largest... [more]

Sim-wings - Canary Islands professional -...

The Prepar3D V4 add-on "Sim-wings - Canary Islands professional - La Palma" has been updated to... [more]

Douglas DC-8 for Prepar3D V4

For a long time, we lacked these important aircraft in our simulators: the Douglas DC-8. The new... [more]

Sim-wings - Canary Islands professional -...

Sim-wings - Canary Islands professional - El Hierro is available now for Prepar3D V4! Though the... [more]

Available now: Fernbus Simulator Add-on -...

The new Fernbus Coach Simulator Add-on - Austria/Switzerland takes you to the Alpine region with... [more]