Product information "S7+1 Advanced Undergound Stock"
This Advanced Train Simulator add-on boasts a part-operational Train Control Management System and the latest Signalling Interface Device which shows the appropriate display for your current Master Control Switch setting.
S7+1 London Underground stock has been in service since 2010 and is only used on the Metropolitan line. The S stock ('S' stands for 'Sub-surface’) has less seating than previous trains but is capable of faster acceleration and has more room for standing passengers.
The S7+1 will operate on any third- or fourth-rail route but Just Trains' Metropolitan Line has been specifically developed for the S7+1 and S8 Advanced and the Just Trains London-Aylesbury route includes the section of the Metropolitan line which runs beside the main line route. These routes include custom London Underground signalling and various invisible markers which allow the functioning of S7+1 features such as the tripcock safety device, door opening interlock and the simulated in-cab video screens which display at stations. Certain advanced features of the S7+1 will not function on routes that are not specifically designed for it.
Train control management system: TCMS display auto-extinguishes over 3 MPH and re-displays under 3 MPH.
Operator - Login screen with keypad
Operator - Destination screen with keypad
Operator - station screen
Operator - Control Panel
Entered radio number on TCMS displays on the radio head
Operating radio display that searches and displays the different radio centre names as you drive on the Metropolitan line
Radio emergency call function if the dead man's handle function on the Traction Brake Control is not used to cancel alarm
Operating passenger emergency alarm: When activated, the PEA alarm shows, the train brakes are automatically applied and the PEA screen displays on the TCMS along with an indication of which carriage has the alarm.
Operating tripcock system (requires Just Trains London Underground signals):
Includes TCMS alert and reset; Passing a signal at danger will apply emergency braking
Realistic tripcock reset procedure required
Speed Control After Tripcock (SCAT) activation, requiring you to drive in Restricted Manual Mode for three minutes after tripcock reset
Train rollback protection: Emergency brake application and Active alarm alert if train is allowed to roll backwards.
Affected doors are highlighted on the TCMS display
Accurate stopping: Accurate stopping, using the stopping chevrons on the platform, is required to allow the doors and simulated in-cab video screens to operate. Correct Side Door Enabled (CSDE) icon will show in the cab when the train is stopped correctly.
Authentic operation and sequencing
Use keystrokes or door OPEN/CLOSE for manual operation of left/right-side door operation
Passenger doors will automatically close after 40 seconds if not manually closed before then
Functioning doors interlock - you cannot drive away if the passenger doors are not shut and proved locked
Left and right manual operation buttons or use keystrokes
You cannot drive away if the cab doors are not shut when in Tripcock mode
Signalling interface device (SID): Latest version of Signalling Interface Device used, as OF February 2019 with VOBC displays.
Analogue and Digital speed displays
Weak Field indication when weak field is detected
Use of the train in Restricted Manual mode displays the correct restricted speedometer range
SID shows the appropriate display depending on which Master Control Switch mode is set
Displays SCAT (Speed Control After Tripping) icon when activated
Sounds: Internal and external sounds recorded from a real S8 include the cab air conditioning unit, various cab switches and controls, windscreen wipers and, on the exterior, the distinctive motor sounds, unique London Underground whistle, air conditioning units, AC/DC convertor, air compressors and door opening/closing audio warnings.
Operating outside door indicator (ODIL): These will illuminate orange when the passenger doors are open. The ODIL on the de-icing car will show blue when de-icing is in operation.
De-icing units: When the appropriate consist is used (not all have de-icing units) it will have a de-icing car in it and you will be able to operate the de-icing function from the TCMS.
Authentic driving experience, as verified by a current S8 driver.
Weak Field operation affects train dynamics, acceleration and top speed
Operational cab lighting – cab light auto-extinguishes when the Master Control Switch is moved from Shutdown
Windscreen wipers with slow and fast speeds
Operational main line air gauge – shows the air pressure in the main line
Operating sensitive edge and alarm acknowledge buttons
High/low whistle lever
Operational task light on Instructor's side
Left and right cab door open/close buttons
Operating sun blinds
Operating hazard lights – flashing front train headlights
Two simulated in-cab video screens showing up to eight static generic platform displays (Train Simulator does not support in-cab video) – one or both of these will display, depending on the station
Operational emergency brake plungers
Restricted Mode (RM) operational – allows a maximum speed of 10 MPH – this is used in certain manoeuvres such as yard work
Cab Corridor Panel functions:
Train key: OFF – ON – TRAIN SECURE
Master Control Switch: Shutdown-Tripcock. Restricted manual area: Forward-Reverse
Tripcock reset button
Hazard warning light button/indicator
Calling On light switch
Calling On light repeater
Scenarios: The following scenarios only run on Just Trains’ Metropolitan Line route add-on for Train Simulator.
The Prepar3D V4/V5 add-on Zagreb professional has been updated to version 22.214.171.124 (P3D V5) &... [more]
You accept the following cookies by clicking on Accept all. You will find further information in the privacy settings, where you can also change your selection at any time. Just go to the page with the data protection declaration. View our data protection declaration.