Accu-sim Piper J-3 Cub (P3D Professional)

P3D V4/V5 Professional
Download
53,99 € *

Preis inkl. 19% MwSt.

Als Sofortdownload verfügbar

  • AS14890
  • A2A Simulations
  • English
  • 1.00
Few airplanes define “stick and rudder” more faithfully and distinctly than does the Cub.... mehr
Produktinformationen "Accu-sim Piper J-3 Cub (P3D Professional)"

Few airplanes define “stick and rudder” more faithfully and distinctly than does the Cub. Aeroncas, Taylorcrafts, Stinsons, Luscombes, Cessnas and all the rest are but refinements and alternatives to what was created by the advent of the Cub. They are all the heirs of the Cub, and as such, owe homage and their very existence to their venerable predecessor.

This version of the Accu-sim Piper J-3 Cub is for P3D V4/V5 Professional only, please make sure that you have the right matching P3D version.

For example, if you start a simple engine that is cold, you expect that it will run rougher and less reliably than when it is warmed up. If one morning you start your cold engine and something seems different, if it does not behave as you expect it to, you will notice this and your senses will tell you, “something is not right.” This is because you have become accustomed and comfortable with how your aircraft responds at all times, not just in the behavior of a single gauge, but in subtle ways — the way the engine sounds and responds to the throttle, the way the body squeaks, or even in the way the air sounds as it passes by your airframe at different airspeeds. More obviously, if you taxi on the grass, you expect your aircraft to buck and dip as it moves over bumps and depressions in the ground. Similarly, you would also expect to sway and rock if sitting on unsettled water in floats. All of this, and much more, will be experienced and brought to you more accurately and realistically by Accu-Sim. Now it’s an entirely new and more real world. It’s a world that makes you believe you literally have a physical piece of equipment stuffed inside your computer monitor because all of these little physical truths which cause actions and reactions, and which you notice when they are there or not there, have been created in Accu-Sim. It is all of these little clues which we experience and observe, and which we take for granted in our real world, which make things seem real to us. When they are missing or portrayed inaccurately, things just don’t seem right. You know it; you sense it, and so do we.

Perhaps the most important thing this little airplane will bring to you is honest, true-to-life stick-and-rudder flying, something pilots often forget after flying large, heavy, fast, complex aircraft for a while. You will be actively engaged in flying this Cub almost all of the time. After just flying it for a very short while you will start to feel like a better pilot, and you will be.

Prepar3D V4 Exclusive Features:

  • Physically based rendering (PBR) of cockpit and exterior
  • Upgraded 3D virtual cockpit
  • New, high-poly ‘Heidi’ passenger and male and female pilots
  • Taildragger flight dynamics tuned for the Prepar3D simulation platform

Standard Features:

  • As with every A2A aircraft, it is gorgeously constructed, inside and out, down to the last rivet
  • Flying qualities built by pilots with unprecedented stall and spin realism
  • Includes standard J-3 Cub, Tundra tires, Floats, and Skis
  • 98 page, full-sized Pilot’s Manual written by Mitchell Glicksman (re-edited/updated by Nick M for the P3D V4 release)
  • Visual Real-Time Load Manager, with the ability to load fuel, oil, pilot, passenger, and cargo in game
  • In cockpit pilot’s map for handy in-flight navigation
  • Fuel delivery system simulated
  • All models include A2A specialized materials with authentic metal
  •  Sound engineered by A2A sound professionals
  • Accu-Sim physics creates an entirely new world including true wing, air-frame, engine, ground, water, and internal systems behaviour
  • Passenger On BoardTM adds a new dimension of piloting realism with an intelligent passenger that is aware of the surroundings, talks when appropriate, including being able to spot and call out traffic
  • Third generation Accu-Sound now allows for a direct connection to the Accu-Sim and FSX physics engine with airflow through the air-frame, window, and door, structural creaks, bumps, jolts etc. with three hundred and ninety sounds in all
  • Piston combustion engine modelling. Air comes in, it mixes with fuel and ignites, parts move, heat up, and all work in harmony to produce the most accurate combustion engine simulation available
  • Engine has an actual life. Good piloting skills are rewarded with longer life and more reliable performance
  • New propeller physics means the propeller is constantly active and allows for both hand and air starting the engine
  • Ground physics realistically rock your wings and buck your tail. Regular tires, skis, and large tundra tires all have their own distinctive ground handling benefits and limitations. Each aircraft comes with its own sound set which is tied in with the physics of the air-frame
  • Tundra tires demand respect for the size and weight of the larger tires. 3-point landing on tarmac is highly recommended
  • Water physics simulate waves, water drag, and creates an authentic “on the step” experience
  • Total audible cockpit experience made with professional recordings from three actual Piper J-3 aircraft
  • Fuel System allows for an authentic primer system with fuel in lines, tank, and authentic gravity-fed fuel-air mixture
  • Third generation engine wear and oil system including an engine that sputters, spits, and runs rough when damaged
  • Both engine and air-frame physically vibrate and shake, based on real world conditions
  • Carburettor icing modelling, which is critical for the proper management of the Continental A-65-8 engine

*This version is for professional users in Prepar3D, in accordance to the Lockheed Martin Prepar3D professional license. This software is to be used for flight simulation only, and not to be used for real world flight training.

Weiterführende Links zu "Accu-sim Piper J-3 Cub (P3D Professional)"

Lockheed Martin Prepar3D V4.4+/V5 Professional*
Operating System: Microsoft Windows 10 (64bit)
Processor: Quad Core CPU with 3.5 GHz
Memory: 16 GB DDR4 RAM, 2666 MHz
Graphics card: 4 GB VRAM, DirectX 11
Free disk space: 2.1 GB, SSD highly recommended

Piper Super Cub Piper Super Cub
  7,95 € *
Boeing 737-200 Boeing 737-200
  55,93 € *
SIMstarter NG P3D SIMstarter NG P3D
  14,95 € *
-80
Mega Airport Prag P3D V4 Mega Airport Prag P3D V4
  5,00 € * 24,95 € *
Wilga X Wilga X
  17,95 € *
Douglas DC-8 Douglas DC-8
  29,95 € *
DHC-2 Beaver DHC-2 Beaver
  46,41 € *
News
OMSI 2 Add-on Bad Hügelsdorf 2020

Das OMSI 2 Add-on Bad Hügelsdorf 2020 ist ab sofort als Download im Aerosoft Online Shop erhältlich. [mehr]

Bus Mechanic Simulator

Der Bus Mechanic Simulator ist ab sofort mit 10% Einführungsrabatt als Download & Box im Aerosoft... [mehr]

Neu im Shop | Lionheart Creations

Pro Flight Simulator-Zusatzpakete für Flight Simulator X und Prepar3D von Lionheart Creations... [mehr]

ToLiss Airbus A319 & A321 Updates

Die XPlane 11 Add-ons A319 & A321 von ToLiss wurden aktualisiert. [mehr]

Honeycomb Config Tool | Version 1.0.5.0

Honeycomb Config Tool | Version 1.0.5.0 (via AS-Updater) [mehr]

Mega Airport Frankfurt V2.0 professional |...

Das Prepar3D V4/V5 Add-on "Mega Airport Frankfurt V2.0 professional" wurde auf die Version... [mehr]

Aerosoft A330 professional | Update 1.0.1.0

Das Prepar3D V4.5+ Add-on "Aerosoft A330 professional" wurde auf die Version 1.0.1.0 aktualisiert. [mehr]

Aerosoft A320/A321 professional | Update

Das Prepar3D V4.5 Add-on "Aerosoft A320/A321 professional" wurde auf die Version 1.3.1.0... [mehr]

Aerosoft A318/A319 professional | Update

Das Prepar3D V4.5 Add-on "Aerosoft A318/A319 professional" wurde auf die Version 1.3.1.0... [mehr]

SIMstarter NG P3D

Das Prepar3D V4.5 & V5 Tool Add-on SIMstarter NG P3D ist ab sofort als Download im Aerosoft... [mehr]