Product information "Southwest China High Speed Rail Network"
The Southwest China High Speed Rail Network, with a length of over 570 km, is composed of several high-speed passenger lines and connects the two most important cities in Southwest China - Chengdu, the capital city of Sichuan Province, and Chongqing, one of the four municipalities in China. The network takes railway travel time between Chengdu and Chongqing down from 10 hours on the previous railway to just one hour! The network also connects Suining, Nanchong, Guang’an and other major cities.
The network is built to Chinese high speed railway standards and trains on the route are capable of running up to 350 km/h. The fastest train, the CRH380 Series, takes only 57 mins to finish the journey between Chengdu and Chongqing.
The network is equipped with the CTCS-3 (China Train Control System) signalling system and both 350km/h and 250km/h trains can run on this route.
The network features 22 stations and this package for Train Simulator also includes the CRH1A EMU (Electro Motive Unit) that is designed for commuter use at the stations along the route. This unit is capable of running at 250 km/h (155 mph) but in normal service runs at 220 km/h (137 mph). The CRH1A also includes the CTCS-3 signalling system.
A CRH1E Sleeper EMU with sleeper cabin passenger view is also included.
12 Standard and four Free Roam scenarios are included to allow you to fly at high speed on the ground and enjoy the beautiful scenery of the Sichuan Basin area.
Currently the fastest route for Train Simulator
Built using Chinese high speed rail standards
Includes more than 150 Chinese-featured objects for the route
CTCS-3 signalling system for both 250km/h and 350km/h trains
Beautiful detailed scenery in Sichuan Basin area
12 Standard and four Free Roam scenarios included
CRH1A EMU and CRH1E Sleeper EMU with sleeper cabin passenger view included
Route is Quick drive enabled
Route length: The total length of the network is over 570km, including:
Chengdu – Suining: 146km
Suining – Chongqing: 156km
Suining – Nanchong: 63km
Nanchong – Chongqing: 170km
Wusheng – Guang’an: 35km
Route class: China Railways class I
Route length: 570km
Mainline tracks: 2
Speed limit: 350km/h for 350km/h trains and 250km/h for 250km/h trains
Parallel distance: 5m
Minimum curve radius: 5000m
Maximum gradient: 2.5%
Train type: Electrical, CRH (China Railway high speed) EMU
Bridges and tunnels length: >60% of total length of the line
Platform length: 450m (16-car consist)
Chengdu East (Chengdudong)
Daying East (Dayingdong)
Chongqing North (Chongqingbei)
Guang’an South (Guang’annan)
CRH1A EMU The CRH1A is based on Bombardier's Regina family. It was designed by Sifang and Bombardier in Sweden. Its potential maximum speed is 250 km/h (155 mph) but in normal use the maximum speed is always restricted by the computerised control system, so the maximum speed in service is usually 220 km/h (137 mph).
Highly detailed models, accurately reproducing the real-world train
CTCS -3 cab signalling system
Cruise mode and Advanced Cruise mode
Real-time speed display in passenger view
Flashing tail light replicating equipment on the real train
CRH1A-01. Introduction to CRH1A EMU (SWCHS): This scenario will teach you how to drive the CRH1A EMU.
CRH1A-02. Fast Service to Jijin (SWCHS): Today you will drive the train to Jijin with only one stop at Cangshan.
CRH1A-03. Bad Weather Run (SWCHS): In bad weather planes and long distance buses usually have to be cancelled or delayed, but trains don’t have that problem. You will drive the train as usual, running from ShibanTan to Cangshan.
CRH1A-04. Short Passenger Run (SWCHS): Short passenger run between Chengdu and Longsheng.
CRH1A-05. Night Express (SWCHS): Fast service from Chengdu to Jijin, then back to Chengdu.
CRH1A-06. Commuter Service (SWCHS): From Suining to Chengdu, you need to stop at every station on the route.
CRH1A-07. Evening Express to Nanchong (SWCHS): Drive the CRH1A starting from Chengdu East Intercity Yards to Nanchong.
CRH1A-08. Wusheng to Suining Express (SWCHS): Drive the CRH1A from Wusheng to Suining on a fine day.
CRH1A-09. Guang’an to Nanchong Express (SWCHS): Drive the CRH1A from Guang’an to Nanchong.
CRH1A-10. Chongqing to Wusheng (SWCHS): Start from Chongqing North CRH depot, heading for Wusheng.
CRH1A-11. Suining to Chongqing North (SWCHS): Drive the CRH1A from Suining to Chongqing North.
CRH1A-12. Chongqing North to Nanchong (SWCHS): Drive the CRH1A from Chongqing North to Nanching in bad weather.
CRH1022A Free Roam scenarios
Free Roam (Chengdu East)
Free Roam (Nanchong)
Free Roam (Chongqing North)
Free Roam (Guang’an South)
European Loco & Asset Pack
US Loco & Asset Pack
Related links to "Southwest China High Speed Rail Network"
Train Simulator Windows 8 / 7 / XP / Vista 3.0GHz PC or any Dual Core 512MB RAM (1GB for Windows Vista / 7 / 8) 256MB video card with Pixel shader 2.0 (AGP/PCE only) Direct X 9.0c compatible sound card 880MB hard drive space Download-size: 840 MB
The following assets are required for the route to display correctly:
The Microsoft Flight Simulator DLC Aerosoft Airport Friedrichshafen has been updated to version... [more]
You accept the following cookies by clicking on Accept all. You will find further information in the privacy settings, where you can also change your selection at any time. Just go to the page with the data protection declaration. View our data protection declaration.