A320 Ultimate XP

The model has its own flight model and a system depth never seen before on any flight sim. The goal was to provide an experience as close to the real aircraft as possible.

Custom Flight model:

• Flight developed by professional to mimic the real aircraft
• Precise aerodynamic model with unique features like transonic effects, hi speed stall etc
• Specific engine model with realistic performance and dynamics
• More than 10,000 simulated objects like computers, sensors, units, data buses, busbars, relays, etc. with its own logic and behavior
• Simulation of data exchange in ARINC data protocol between aircraft computers with precision loss and delays

High-Definition Model:

• Hi-quality and realistic interior and exterior visual model
• Hi-quality and realistic sound pack with hundreds of sounds from the real aircraft
• Hi-quality display graphics (4K panel)
• Unique rain effects
• Fast access popup panel system
• Precise aerodynamical model with unique features like transonic effects, hi speed stall etc
• Specific engine model with realistic performance and dynamics
• More than 10,000 simulated objects like computers, sensors, units, data buses, busbars, relays, etc. with its own logic and behavior
• Simulation of data exchange in ARINC data protocol between aircraft computers with precision loss and delays.
• Realistic simulation of transition effects, self-tests and other real aircraft undocumented features
• Physically based implementation of electric, hydraulic, fuel and pneumatic systems with realistic responses and state transitions
• Precise flight management system with full profile predictions and modes of operation
• Autopilot, indistinguishable from real aircraft, with all modes, transition effects and undocumented features

• X-Plane 11+
• OS: Windows (64 bit) or macOS 10.10 - 10.15 (Catalina) (Linux not supported at this time)
• Processor: 4-cores Intel Core I5-8400 or AMD Ryzen 5 2500X
• Video Card: GeForce GTX 970 or AMD Radeon RX 580 with 4 GB VRAM  (8 GB recomended)
• RAM: 8 GB (16 GB highly recommended)
• Disk space: 2 GB

Version 1.2.5:

• Crash after flight plan changes
• Fixed output.cfg windows for Vulkan
• EFIS Baro mode sync
• Sometimes HOLD built incorrectly for direct entry
• Aircaft symbols incorrect heading in ND PLAN mode
• Incorrect courses in HOLD page for computed holds
• Incorrect courses for some legs in FPLN page

BETA 1.2.2:
Fixes:

• Datarefs API not available

BETA 1.2.1:
Fixes:

• Cannot select alternate near then 40NM from destination
• Autopilot became crazy on high altitude
• Temporary flight plan output data fixes

BETA 1.2.0:
Improvements:

• HOLDs function: hold configuration from database, computed and manual entering
• HOLDs function: exiting hold
• HOLDs speed management: deceleration point, automatic deceleration for entering hold and acceleration after exit
• flight controls tuning (takeoff, landing and inflight direct mode)
• ALTERNATE PAGES completed
• INIT B page (and FUEL PRED): ALT/TIME value computes for selected ALT airport
• INIT B page (and FUEL PRED): New s-pad messages were added
• Stored waypoints limitation has increased to 40

Fixes:

• INIT A - ground temperature isn't selectable. There wasn't a possibility to enter ground temperature manually. Automatic ground calculation according to airport height.
• PROG page Required accuracy had no posibilitty to be entered manually
• PERF - CHECK T/OFF DATA
• INIT B page (and FUEL PRED): the MIN DEST FOB cannot be erased or changed
• INIT B page (and FUEL PRED): the ALTN-Fuel stays empty and isn't being calculated by the MCDU. Also cannot be entered or erased manually
• INIT B page (and FUEL PRED): EXTRA-fuel value isn't correct computed
• Airways page is scrollable. Insert and erase buttons don't appear at last line
• SEC doesnt not take pitch control when ELAC is not engaged
• returned X-RAAS win.xpl

Version 1.1.16:
Improvements:

• Manual PA selection tab in EFB

Fixes:

• Magnetic variation not taken in account in FixInfo
• Wrong estimate time on FixInfo page
• Crash because of TCAS with many planes
• TCAS traffic not filtered by selector
• TCAS shows traffic if STBY mode selected
• Blank screen EFB on MacOS
• Landing lights datarefs blinking

BETA 1.1.15:
Improvements:

• Manual PA selection tab in EFB

Fixes:

• Blank screen EFB on MacOS
• TCAS traffic not filtered by selector
• Landing lights datarefs blinking

BETA 1.1.14:
Fixes:

• Fixed crash because of TCAS with many planes
• TCAS shows traffic if STBY mode selected
• Crash after PPOS->ARRIVAL click after touchdown and go-around

Version 1.1.13:
Improvements:

• FIX INFO page completed
• TCAS new implementation (single threat)
• MAC binaries signed and notarized
• EFIS Baro selector synchronization option

Fixes:

• spoilers half position in Cold&Dark state
• SVCE INT OVRD button always ON
• Several Clock issues (year, setting values)

BETA 1.1.12:
Improvements:

• MAC binaries signed and notarized

BETA 1.1.10:
Improvements:

• FIX INFO page completed
• TCAS new implementation (single threat)
• EFIS Baro selector synchronization option

BETA 1.1.9:
Improvements:

• some performance optimization
• panel hotkeys now are optional in EFB

Fixes:

• fixed axis curves input
• SpeedBrake binded key fix
• arming SpeedBrake in VR
• fixed crash after clicking HOLD button on point just before PPOS
• get rid of artifacts when using RainEffect on OpenGL

BETA 1.1.8:

• Fixed VR input

BETA 1.1.7:

• Some performance optimization
• Panel hotkeys now are optional in EFB

Fixed:

• Fixed axis curves input
• SpeedBrake binded key fix
• Fixed crash after clicking HOLD button on point just before PPOS
• Get rid of artifacts when using RainEffect on OpenGL

Version 1.1.5:
Fixed:

• XPlane crash when CEF installed on MAC OS

Version 1.1.3:
Fixed:

• Impoved winshield reflections on Vulcan
• Removed lua log flood

Version 1.1.2:
Improvements:

• TCA Airbus Quadrant support

Fixed:

• Crash on 1st gen Intel Core, Xeons and old AMD
• APU bleed altitude limitations
• Windshield reflections
• Spoilers lever dataref

Version 1.1.0:
Improvements:

• Vulcan graphic driver support

Fixed:

• Saving and restoring popout panels layout
• Saving reflection effect setting
• Spring loaded INT/RAD switch
• Joystick axes curvers and beta/reverse support

BETA 1.0.10:
Fixed:

• Transparent terrain radar
• Input issue on multimonitors under Vulcan mode
• Saving and restoring popoput panels layout
• Saving reflection effect setting
• Spring loaded INT/RAD switch

BETA 1.0.9:
Fixed:

• Metal graphics driver support (on MacOs)
• Joystick axes curvers and beta/reverse support

BETA 1.0.8:
Improvements:

• Vulcan graphic driver support

Full version 1.0.7:
Fixes:

• Inoperable EFB in some cases
• Different multi-monitor panels and render issues
• Rudder trim stuck after -20deg
• Render in OGL mode on X-Plane 11.50
• AMU CAB light flash
• ISIS position saving
• Hiding panels by click on 2D and 3D cockpit panels
• Increased takeoff and taxi lights intensity
• APU start in flight after dual engine failure
• Saving standard and popout panels configuration
• Panels resizeing
• Possible windows positioning out of visible area
• Multi-monitor support for different cockpit interaction modes
• Keyboard input into EFB in 2D window mode
• Auto CabinReady set in the begining of running before takeoff
• Multi-monitor configurations support
• Windows resize in pop-out mode
• Applying X-Plane UI scaling for new windows

BETA 1.0.6:
Fixed:

• Restored list of failures
• Inoperable EFB in some cases

BETA 1.0.3:
Fixed:

• Saving standard and popout panels configuration
• Panels resizeing
• Possible windows positioning out of visible area
• Multi-monitor support for different cockpit interaction modes
• Keyboard input into EFB in 2D window mode

Version 1.0.1:

• Fixed pop up windows in scaled interface

Version 1.0.0:
Improvements:

• Failures scenarios editor added
• CARGO HEAT and CARGO SMOKE panels functionality
• CVR panel interaction
• All variables in publish.txt available for writing by default
• Pop-out 2D windows
• Added particle effects

Fixes:

• Fixed datarefs export via publish.txt file
• Fixed broken failures conditions
• Do not advice to shutdown second engine when first engine is on fire
• Fixed failures reset button
• Fixed xEnviro related radar crash
• Fixed overhead buttons textures
• Reduced rudder pedals motion
• Various ND and PFD fixes
• Thrust levers mouse drag fix
• Publish.txt fixed on mac
• Fixed MouseHandler crash on macOS
• Fixed degrade to direct low after switching IR1 off
• Added ClockSet command
• Fixed crash after starting new flight when A320U already loaded
• Reduced ROSE VOR deviation scale on ND
• Some visual fixes in ASU
• Fixed Oxy mask test button click zone
• Fixed bug with throttle jumped to 30% after reverser button
• Removed awfull noise after aircraft reload
• Fixed thrust lever position in cold state
• Fixed crash on AMD Ryzen processors
• RF legs strung in RNAV approaches

BETA 0.11.6:

• Added particle effects
• Pop-out windows fixed

BETA 0.11.2:

• Fixed datarefs export via publish.txt file
• Fixed broken failures conditions
• Do not advice to shutdown second engine when first engine is on fire
• Fixed failures reset button
• Fixed xEnviro related radar crash

Version 0.10.8: 

• Improved CPU usage on MAC
• Fixed clicks in VR mode
• Fixed communication with activation server
• Removed all spaces from the commands list and renewed the commands.txt file
• Weather radar added
• CIDS: added Flight Attendant Panel (FAP) to EFB
• CIDS: cabin and galley illumination control from FAP
• CIDS: cabin ready function
• CIDS: temperature control from FAP
• CIDS: cabin and mech calls, interphone, PA announcements and audio management
• CIDS: EVAC function
• Emergency lighting

BETA 0.10.7:
Improvements:

• Emergency lighting
• CIDS: EVAC function
• CIDS: crew speeches and announcement updates

Version 0.9.7:
Fixes:

• Radio tune knob fix
• Fixed bug with blue spots on indicators and controls on MacOs
• Fixed logic when outer tank is empty (caused bug in temperature value)
• Fixes faults messages
• Fixed default position of some switches according to real life position in that situation
• MCDU: Fixed logic on INIT A with engine running (left right arrow now redirects to FUEL PRED PAGE)
• MCDU: INIT A page is now available in flight; some changes in logic based on airborne/ground logic
• MCDU: fixes in secondary flight plan init
• MCDU: fixed logic of entering CRZ FLT LVL
• MCDU: fixed appearing/disappearing of some messages and scratchpad clearing
• MCDU: fixes in DIR-TO page (ABEAM / w/o ABEAM logic)
• SD: Fixed Positioning of Status and added missing elements of clean STS Page
• PFD: some cosmetic fixes
• Changed MAX altitude to FL398 for flight plan
• Fixed logo/wings lights
• Various texture fixes

Improvements:

• Emergency crew oxygen system (controls, indications, stowage boxes and mask test)
• Emergency passengers oxygen system (indicators and controls)
• Added an alternative input sistem (FlightFactor standard)
• Added VR compatability with two modes
• Added a dataref for each action in cockpit that can be both monitored and written
• Added datarefs and command lists
• Added datarefs publishing system for 3rd party
• Added commands to ALL functions in the cockpit that can be used on hardware
• Added Predictive GPS Page with basic input logic
• Cockpit door locking system
• Fade-in for sound when airplane initializing
• Versions compatible states (no need to recreate states after airplane upgrade)
• Updated service vihicles
• Added lightening for overhead, FCU and EFIS knobs