Product information "aviaworx - aviaFlightMonitor License MSFS"
aviaFlightMonitor monitors your approaches and gives you direct feedback on how well you did.
aviaFlightMonitor will monitor and analyze many of the flight parameters that airlines use in their Flight Data Monitoring (FDM) and Flight Operations Quality Assurance (FOQA) programs. These programs are used to gain operational insight into how well flight crews are performing and flying approaches. It’s a key element of safe airline operations.
The goal behind aviaFlightMonitor is to give you a similar feedback tool so that you can analyze and improve as you fly your aircraft. Like the other apps offered under the aviaServer solution, the target audience is the serious flight simmer striving for the most realistic environment to operate the virtual aircraft.
By making use of the latest real navdata, aviaFlightMonitor will track your approaches automatically and provide a detailed analysis after your rollout.
Stabilized Approaches aviaFlightMonitor (AFM) tracks the last 4000ft of each approach. Approximately 15 seconds after landing, a report is automatically generated giving you feedback on identified risks.
We’ve heard it before – a good landing is the direct result of a stabilized approach. But, what exactly is that?
There are multiple ‘gates’ airlines use to define stabilized criteria. While these gates will differ between each airline, AFM will use these ones:
1000ft Gate – in IMC conditions, this is typically used by all airlines to determine stable approach conditions. 1000 feet above the threshold, you are expected to
Be in final landing configuration: this means no more changes to flaps and landing gear down and locked.
Have a stable attitude. AFM imposes a pitch angle limit between +10° and -3° and a bank angle limit of 20°
Have a stable vertical speed. AFM accepts a value between -100 and -1200 fpm
Have a stable approach profile: Be on centerline and on glideslope. AFM limits this to 1 dot deviation high/low and left/right
Have a stable airspeed. AFM expects the airspeed not to deviate more than 10 knots from your entire approach profile
Have stabilized engine performance. AFM imposes a 35% N1 (for Jets) and 10% Np (for turbo props)
Follow the runway track. AFM allows a 10° deviation.
500ft Gate. Some airlines are more lenient in VMC conditions and don’t impose the limits as mentioned above, but many airlines will use the 1000ft Gate both for IMC and for VMC conditions.
As you descend further, the limitations become tighter. As an example, the maximum allowed tailwind component over the threshold will be 10 knots. Also, at this point, the lateral distance between the aircraft and the runway centerline is expected to be less than 10% of the runway width.
The final checks are performed just prior to touchdown, where, as an example, the aircraft’s heading is expected to be within 10° of the runway’s course. Your touchdown point will be evaluated and should not be 1000ft beyond the Aiming Point. A touchdown prior to the Threshold will automatically result in a high risk assessment. A vertical speed beyond 600 fpm will be considered a high risk landing as well, due to potential structural damage.
Scoring Each report will have a final score and the higher the score, the more risks were identified. An ideal score of 0 should be your goal but of course, airmanship may dictate executing approaches in circumstances that won’t result in a 0 score result. At the end of the day – you are the Pilot in Command and will need to justify your score.
Approach Report aviaServer is used to display the approach report, similar to other services such as aviaCDU or aviaEFB.
The X-Plane 11 add-on Miami City XP by Drzewiecki Design is now available for free! [more]
You accept the following cookies by clicking on Accept all. You will find further information in the privacy settings, where you can also change your selection at any time. Just go to the page with the data protection declaration. View our data protection declaration.